Xplore Email on an Apple iOS 15 Device

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Mail
3. Under Mail, tap Accounts
4. Under Accounts, tap Add Account
5. Choose Other
6. Under Add Account, tap Add Mail Account
7. Enter your Name as you want it to appear in the "From" section when sending email
8. Enter your full Email address, including the portion after the @ symbol
9. Enter your email Password
10. Enter whatever you like in the Description field, or keep the auto populated value
11. Tap Next
12. If you entered your email address and/or password incorrectly, or if it can’t determine your settings automatically, it require you to enter the incoming and outgoing mail server settings; otherwise it will continue at step 13:
    1. Leave IMAP selected (on the left) – POP is an option but is not recommended
    2. Verify that your full email address is correct in the Email field
    3. Enter the Incoming Mail Server Host Name as imap.xplore.net
    4. Enter your full email address as the User Name
    5. Enter your email Password (if necessary)
    6. If necessary, scroll down to see the Outgoing Mail Server settings
    7. Enter the Outgoing Mail Server Host Name as smtp.xplore.net
    8. Enter your full email address as the User Name
    9. Enter your email Password (if necessary)
    10. Tap Next at the top
13. You can choose to sync Notes as well or leave it unselected (optional)
14. Tap Save
15. Under Accounts, tap the Mail one you just added (either by email address or the description you entered, such as Xplore)
16. Under IMAP, tap the Account email address
17. Verify that the Incoming Mail Server Host Name is imap.xplore.net, and correct it if not
18. Scroll down (if necessary) and tap SMTP
19. Tap the Primary Server
20. Verify that the Outgoing Mail Server Host Name is smtp.xplore.net, and correct it if not
21. Verify that Use SSL is enabled (green), and enable it if not
22. Change that the Server Port to 465 (587 will work, but 465 is recommended)
23. Tap Done
24. Tap < Account at the top
25. Scroll down to the bottom (if necessary) and tap Advanced
26. Under Mailbox Behaviors, tap each of Drafts Mailbox, Sent Mailbox and Deleted Mailbox, and verify that there is a checkmark against the appropriate folder under On The Server (not On My [iOS device]) and correct if necessary:
    1. Drafts Mailbox: Drafts
    2. Sent Mailbox: Sent Items
    3. Deleted Mailbox: Trash
27. Tap < Advanced at the top after each Mailbox Behavior is verified
28. Scroll down and verify that Use SSL is enabled (green), and enable it if not
29. Verify that the Server Port is 993 and correct if not
30. Tap < Account at the top
31. Tap Done

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Contacts
3. Under Contacts, tap Accounts
4. Under Accounts, tap Add Account
5. Choose Other
6. Under Contacts, tap Add CardDAV Account
7. For Server enter mail.xplore.net
8. For User Name enter your full email address
9. For Password enter your email password
10. Enter whatever you like in the Description field. It will be auto-populated with what was entered in the Server field
11. Tap Next
12. If it asks you “What would you like to do with existing local contacts” tap Keep on My [iOS device]

If you wish to make your webmail Contacts as the Default Contacts on your iOS device, such that when you add a new contact on your iOS device, it will save it in your webmail Contacts too, do the following:

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Contacts
3. Tap Default Account
4. Tap your Contacts account (either by the Description you have for it, such as mail.xplore.net, or “My CardDAV Account” if you left the Description blank)

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Calendar
3. Under Calendar, tap Accounts
4. Under Accounts, tap Add Account
5. Choose Other
6. Under Calendars tap Add CalDAV Account
7. For Server enter mail.xplore.net
8. For User Name enter your full email address
9. For Password enter your email password
10. Enter whatever you like in the Description field. It will be auto-populated with what was entered in the Server field
11. Tap Next
12. Tap Save

If you wish to make your webmail Calendar as the Default Calendar on your iOS device, such that when you add a new event on your iOS device, it will save it in your webmail Calendar too, do the following:

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Calendar
3. Tap Default Account
4. Tap your Calendar account (either by the Description you have for it, such as mail.xplore.net, or “My CalDAV Account” if you left the Description blank)

If you changed your email password in webmail or in the MyXplore customer portal, you will need to change it in Settings to match the new password.

For your email account in the Mail app:

You may get error messages like “Cannot Get Mail” or “Cannot Send Mail”. If so, tap OK.

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Mail
3. Under Mail, tap Accounts
4. Under Accounts, tap your Mail account (either by email address or the description you have for it, such as Xplore)
5. Under IMAP (or POP, if your account was previously setup that way), tap the Account email address
6. Under Incoming Mail Server, enter the new Password you set in webmail or MyXplore
7. Scroll down (if necessary) and tap SMTP
8. Tap the Primary Server
9. Under Outgoing Mail Server, enter the new Password you set in webmail or MyXplore
10. Tap Done
11. Tap < Account at the top
12. Tap Done

For your sync’d Webmail Contacts:

It should prompt you for your new password with:

• Password Incorrect
• Enter the password for the CardDAV account “mail.xplore.net”

Enter your new Password and tap OK

If it does not prompt you for your new password, follow these steps:

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Contacts
3. Under Contacts, tap Accounts
4. Under Accounts, tap your Contacts account (either by the Description you have for it, such as mail.xplore.net, or “My CardDAV Account” if you left the Description blank)
5. Enter the new Password you set in webmail or MyXplore and then tap Done
   1. If you entered the password incorrectly, it will give error “CardDAV account verification failed”
   2. Tap OK, and try entering the correct password again
6. It will return to Accounts once changed successfully

For your sync’d Webmail Calendar:

It should prompt you for your new password with:

• Password Incorrect
• Enter the password for the CalDAV account “mail.xplore.net”

Enter your new Password and tap OK

If it does not prompt you for your new password, follow these steps:

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Calendar
3. Under Calendar, tap Accounts
4. Under Accounts, tap your Calendar (or Calendars, Reminders) account (either by the Description you have for it, such as mail.xplore.net, or “My CalDAV Account” if you left the Description blank)
5. Tap your Account under CALDAV
6. Enter the new Password you set in webmail or MyXplore and then Tap Done
   1. If you entered the password incorrectly, it will give error “CalDAV account verification failed”
   2. Tap OK, and try entering the correct password again
7. It will return to CALDAV screen once changed successfully

Your password is now changed to match what you set it to in webmail or MyXplore.

Click here to download a PDF copy of this guide with screenshots.

You may get error messages like “Cannot Get Mail” or “Cannot Send Mail”. If so, tap OK.

1. From your Home Screen or the appropriate folder, tap the Settings icon
2. Scroll down and tap Mail
3. Under Mail, tap Accounts
4. Under Accounts, tap your Mail account (either by email address or the description you have for it)
5. If it’s IMAP, tap the Account email address; otherwise continue to the next step
6. Under Incoming Mail Server, verify the following settings, and change them if necessary:
   1. If it says IMAP Account Information at the top
      1. Host Name: imap.xplore.net
   2. If it says POP Account Information at the top
      1. Host Name: pop.xplore.net
   3. User Name: your full email address, including the portion after the @ symbol
   4. Password: your email password
7. Scroll down (if necessary) and tap SMTP
8. Tap the Primary Server
9. Under Outgoing Mail Server, verify the following settings, and change them if necessary:
   1. Host Name: smtp.xplore.net
   2. User Name: your full email address, including the portion after the @ symbol
   3. Password: your email password
   4. Use SSL: enabled (green)
   5. Server Port: 465
   6. Tap Done
10. Tap < Account (or the name of the account) at the top
11. Scroll down to the bottom and tap Advanced
12. Under Incoming Settings, verify the following settings, and change them if necessary:
    1. Use SSL: enabled (green)
    2. If it says IMAP Path Prefix above Server Port
       1. Server Port: 993
    3. If it says Delete from server above Server Port
       1. Server Port: 995
13. Tap < Account (or the name of the account) at the top
14. Tap Done